Fan Sink - HP EliteDesk 800 G1 Tower Service Manual

Fan sink

Description
Fan sink
The fan sink is secured atop the processor with four captive Torx screws. The fan sink includes a heat
sink and a fan.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the fan duct
4. Loosen the four captive Torx T15 screws that secure the fan sink to the system board tray.
CAUTION:
the downward forces on the processor. This is especially important as the pins on the socket are
very fragile and any damage to them may require replacing the system board.
(Access panel on page
(Fan duct on page
Remove fan sink retaining screws in diagonally opposite pairs (as in an X) to even
(Preparation for disassembly on page
95).
124).
Spare part number
727150-001
94).
Fan sink
135