To remove a 3.5-inch bezel blank, press outward on the two retaining tabs that hold the
●
bezel blank in place (1) and rotate the bezel blank back and to the right to remove it (2).
To remove a slim optical drive bezel blank, press inward on the retaining tabs that hold the
●
bezel blank in place (1) then pull the bezel blank from the front bezel (2).
NOTE:
After removing the slim optical drive bezel blank and installing a slim optical drive,
you can install an optional bezel trim piece (available from HP) that surrounds the front of the
slim optical drive.
Bezel blanks
49