Changing From Desktop To Tower Configuration - HP EliteDesk 800 G1 Tower Service Manual

Changing from desktop to tower configuration

The Small Form Factor computer can be used in a tower orientation with an optional tower stand that
can be purchased from HP.
1.
Prepare the computer for disassembly
2.
Orient the computer so that its right side is facing down and place the computer in the optional
stand.
NOTE:
tower stand.
3.
Reconnect the power cord and any external devices, then turn on the computer.
NOTE:
clear and free of obstructions.
140 Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
To stabilize the computer in a tower orientation, HP recommends the use of the optional
Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains
(Preparation for disassembly on page 94).