Fan Sink - HP EliteDesk 800 G1 Tower Service Manual

Fan sink

Description
Fan sink (includes replacement thermal material)
WARNING!
components to cool before touching.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Loosen the four silver captive Torx T15 screws that secure the heat sink to the system board.
CAUTION:
the downward forces on the processor. The pins on the socket are very fragile and any damage to
them may require replacing the system board.
To reduce risk of personal injury from hot surfaces, allow the internal system
(Access panel on page
Remove fan sink retaining screws in diagonally opposite pairs (as in an X) to even
(Preparation for disassembly on page
45).
Spare part number
727142-001
44).
Fan sink
79