Advertisement
Learn
When the Learn function has been selected the SCS 311 or
SCS317 will wait to be included to or excluded from another
controller.
If the installer does not start the inclusion/exclusion process of
the other node within 60s, or the SCS311 or SCS317 does not
receive a response within 3 minutes of beginning exclusion with
another node, then a failed outcome will be indicated.
Note 1: any associations will be cleared if the SCS 311 /317 have engaged
in Learn mode with another controller regardless or a successful or failed
outcome.
Note 2: the SCS 311 /317 does not support control group replication.
Listen
Puts the SCS311 or SCS317 into a listening state enabling it to
receive messages outside of the Wake Up Notification Period.
This state lasts for at least 60 seconds or until the user cancels it
by pressing BACK.
Associate/Disassociate
This function allows the installer to manually associate
/disassociate devices to Association Group 2. When associated
the node will be under direct control of the SCS311 or SCS317
heating algorithms. On selecting associate, the installer has 60s
to initiate a NIF from desired node. In the event of the 60s period
elapsing a failed message will be shown on the display.
8
Advertisement
