Advertisement
Accessing SET UP MENU/ Z-WAVE Menu
To access the SET UP MENU take the following steps.
Press ENTER twice
Menu Options
Select clock format
Daylight saving
Standby temperature
Lower temperature limit This sets the lowest temperature setting the
Press '-' or '+' until
Set Up appears on
the display
This allows the display to show the time in
24 hour or AM/PM format
This is the adjustment made in the UK when
the clocks go back or forward in the Autumn
and Spring
Default setting ON
This is the temperature setting used when in
Standby or Holiday mode (Min 5˚C / Max
30˚C)
In cold weather the heating will activate if
the temperature being measured falls below
this temperature setting
SCS311 or SCS317 will allow to be
programmed
Default setting 5˚C
Press ENTER
Press '-' or '+' to toggle
between the menu options
detailed below
5
Advertisement
