Advertisement
Include / Exclude
When the Include/Exclude function has been selected it will wait
for a request to join the network from another node.
If the installer does not start the Inclusion/Exclusion process of
the other node within 60s, or the SCS311 or SCS317 does not
receive a response within 3 minutes from another node, then a
failed outcome will be indicated.
Note 1: When including a device that supports Thermostat Mode HEAT, the
SCS311 or SCS317 will automatically associate it to Group 2 (switch
association group).
Note 2: If an associated node to SCS311 or SCS317 is excluded from the
network, it will be removed from the Association Group it is stored in.
Listen
Associate node
Disassociate node
Controller shift
Protocol reset
Puts the SCS311 or
SCS317 into listen
mode, for up to 60
seconds.
Used to manually
associate devices to
control.
Used to manually
disassociate all
associated
switches.
Used to offer the
Primary Controller role
to another controller.
Used to reset the Z-
Wave network.
7
Advertisement
