Download Print this page
Secure SCP318 User Operating Instructions Manual

Secure SCP318 User Operating Instructions Manual

Single channel z-wave 7 day time control and rf room thermostat

Advertisement

Quick Links

SCP318
USER OPERATING INSTRUCTIONS
Single channel Z-Wave 7 day time control and
RF room thermostat
The Secure SCP318 combined wireless room stat and time
control allows a combi boiler system to have a room thermostat
added without the need for any additional wiring.
Replacing the existing time controller with the SCP318 will allow
the room thermostat to be connected wirelessly producing
immediate energy savings in houses where no previous room
thermostat has been fitted.
The device is intended to upgrade existing combi boiler systems
that do not have an existing room thermostat. It is not intended for
new installations where it will be necessary to install two heating
zones in order to comply with current Building Regulations.
1

Advertisement

loading

Summary of Contents for Secure SCP318

  • Page 1 Replacing the existing time controller with the SCP318 will allow the room thermostat to be connected wirelessly producing immediate energy savings in houses where no previous room thermostat has been fitted.
  • Page 2 General system - explanation for householder The SCP318 is a timeswitch which is connected to its own room thermostat - using the latest Z-wave wireless technology. Where it has been used to replace your existing time control it is likely that there was no room thermostat fitted previously.
  • Page 3 The room thermostat will only operate during ‘On’ periods set by the time control which is always indicated by the red neon indicator light on the front. If there is no light then the heating is ‘Off’ and the room thermostat is inoperative. When the timeswitch is ‘On’...
  • Page 4 The SCP318 timeswitch The simple instructions contained in this user guide are designed to help with the programming and operation of the unit. SET indicator - RUN is the normal position Time of day Switch period symbol SET button BOOST or adjust (-) button...
  • Page 5: Manual Overrides

    Manual Overrides Boost Function - 1 Hour Temporary Override The boost facility will allow the user to boost the system which is currently ‘OFF’ for 1 hour. To indicate the boost being activated BOOST will be shown on the display for the duration of the boost period.
  • Page 6 Programme Override Facilities With the SCP318 timeswitch operating in the normal running mode it is possible to alter the functionality of the programme by means of the SELECT button. The options include; Auto - Timeswitch follows all programmed ‘ON’ and ‘OFF’ times.
  • Page 7: Resetting The Timeswitch

    Resetting the timeswitch Electronic equipment can in some circumstances be affected by electrical interference. If the programmer’s display becomes frozen or scrambled; or if you wish to revert back to the default time settings please reset by pressing the SET and SELECT buttons together as shown below.
  • Page 8 Setting Time of Day and Date The SCP318 timeswitch has a built in clock and calendar. This will mean that you will need to enter the date as well as the time on initial set up or if the factory re-set has been used.
  • Page 9 Setting the On and Off Times To alter these settings please proceed as follows:- Press the set button until set + and - + and - + and - Press Press Press indicator is buttons buttons buttons ENTER ENTER ENTER next to HW to adjust to adjust...
  • Page 10 SCP318 Room Thermostat User Instructions The Secure SCP318 thermostat u s e s t h e l a t e s t c o n t r o l technology to provide extremely accurate temperature control which will help to keep your...
  • Page 11 ‘Explanation for householders’ that precedes this section. Battery Replacement Battery should be changed The SCP318 thermostat runs on immediately 2 x type AAA (Alkaline) non Low battery symbol rechargeable batteries and is appears first when...
  • Page 12 To change the batteries it is necessary to remove the thermostat from the wall. To do this first undo the two captive screws at the base of the thermostat and swing the thermostat up and away from the wall plate. Remove the old batteries and replace them with two new AAA size alkaline batteries ensuring that they are fitted correctly as...