Advertisement
Before fixing the wall plate in position check to see that the
thermostat is still able to communicate satisfactorily with the
controller by turning the thermostat temperature up the
controller should provide the appropriate response.
Offer the plate to the wall in the position where the SCS311 /
SCS317 is to be mounted and mark the fixing positions through
the slots in the wall plate. Drill and plug the wall, then secure the
plate into position. The slots in the wall plate will compensate for
any misalignment of the fixings.
Complete installation by swinging the SCS311 / SCS317 into
position by engaging with the lugs at the top of the wall plate
before pushing it carefully home into its plug-in terminal block.
Tighten the 2 captive screws on the underside of the unit.
4
Advertisement
