Setup Menu; Menu Options - Secure SCS317 User Instructions

SETUP MENU

To access the SET UP MENU take the following steps:
Press ENTER twice

MENU OPTIONS

Select clock format
Daylight saving
Standby temperature
Lower temperature limit This sets the lowest temperature setting the
Upper temperature limit This sets the highest temperature setting
Press '-' or '+' until
Set Up appears on
the display
This allows the display to show the time in
24 hour or AM/PM format
This is the adjustment made in the UK when
the clocks go back or forward in the Autumn
and Spring.
Default setting ON
This is the temperature setting used when in
Standby or Holiday mode (Min 5°C / Max
30°C)
In cold weather the heating will activate if
the temperature being measured falls below
this temperature setting.
SCS317 will allow to be programmed.
The default setting is 5°C
the SCS317 will allow to be programmed
The default setting is 30°C
Press ENTER
Press '-' or '+' to
toggle between the
menu options
detailed below
13