Sensor (Stacker Bin Upper Limit) Or Sensor (Stacker Bin No Media) Removal - Lexmark W840 Finisher Service Manual

4024-XXX

Sensor (stacker bin upper limit) or sensor (stacker bin no media) removal

1.
Remove the rear upper cover. See
2.
Remove the stacker media bin assembly. See
3.
Remove the stacker bin lift motor assembly. See
page 4-38.
4.
Remove the four screws securing the metal cover (A) to the finisher.
5.
Remove the metal cover (A).
6.
Disconnect the connector from the sensor (stacker bin upper limit) (B) or the sensor (stacker bin no
media) (C).
7.
Release the hooks of the selected sensor.
8.
Remove the sensor.
4-36
Finisher Service Manual
"Rear upper cover removal" on page
"Stacker media bin assembly removal" on page
"Stacker bin lift motor assembly removal" on
4-24.
4-22.