Finisher Front Door Assembly Removal - Lexmark W840 Finisher Service Manual

Finisher front door assembly removal

1.
Open the finisher front door assembly (A).
2.
Remove the three screws securing the finisher front door assembly.
3.
Remove the finisher front door assembly.
Replacement note: Make sure the actuator molded in the finisher front door assembly properly engages the
switch (finisher front door interlock) (B). The two magnetic catches (C) should properly engage the finisher.
A
B
B
4024-XXX
C
Actuator
C
4-27
Repair information