Sensor (Stacker Bin Level 1) Removal; Sensor (Stacker Bin Level 2) Removal - Lexmark W840 Finisher Service Manual

4024-XXX

Sensor (stacker bin level 1) removal

1.
Remove the finisher front door assembly. See
2.
Remove the rear upper cover. See
3.
Disconnect the connector from the sensor (stacker bin level 1) (A).
4.
Remove the screw securing the sensor (stacker bin level 1) (A) to the finisher.
5.
Remove the sensor (stacker bin level 1) (A).

Sensor (stacker bin level 2) removal

1.
Remove the finisher front door assembly. See
2.
Remove the rear upper cover. See
3.
Disconnect the connector from the lift tray height sensor (stacker bin level 2) (A).
4.
Remove the screw securing the sensor (stacker bin level 2) (A).
5.
Remove the sensor (stacker bin level 2) (A).
4-34
Finisher Service Manual
"Rear upper cover removal" on page
Front
"Rear upper cover removal" on page
A
"Finisher front door assembly removal" on page
A
"Finisher front door assembly removal" on page
4-27.
4-24.
4-27.
4-24.
Rear