Upper Media Exit Pinch Roll Assembly Removal - Lexmark W840 Finisher Service Manual

Upper media exit pinch roll assembly removal

1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the top cover. See
4.
Remove the four screws securing the four upper media exit pinch roll assemblies (A) to the finisher.
Rear
5.
Remove the four upper media exit pinch roll assembly (A).
"Rear upper cover removal" on page
"Top cover removal" on page
A
4-24.
4-19.
Left
Repair information
4024-XXX
4-105