Sensor (Bridge Unit Top Cover Interlock) Removal - Lexmark W840 Finisher Service Manual

Sensor (bridge unit top cover interlock) removal

1.
Remove the bridge unit assembly. See
2.
Place the bridge unit assembly upside down.
3.
Remove the screw securing the bracket (A) to the bridge unit assembly (B).
4.
Disconnect the cable from the sensor (bridge unit top cover interlock) (C).
5.
Release the hooks securing the sensor (bridge unit top cover interlock) (C) to the bracket (A).
6.
Remove the sensor (bridge unit top cover interlock) (C).
"Bridge unit assembly removal" on page
C
A
B
4024-XXX
4-2.
4-15
Repair information