5.2.1.1
Lexmark T650, T652, T654 and X658de MFP Optional Finisher
The optional finisher supports only one staple position. You can not physically change the position of the
staple. The printer automatically rotates text before stapling when the finisher is installed. If necessary,
reformat your job on the host with a different text orientation to avoid stapled sets that are hard to read.
Refer to your printer or finisher documentation to determine the finishing support and staple location for
various paper sizes. Finishing functions may not be applied to all paper sizes.
Parameters in the printer file that affect stapling
Printer device type
Output bin
Corner staple
The *DEVD staple position is the top left. Specifying any other setting may cause an exception to be
reported to the host.
Drawing of staple placement
*DEVD
*TOPLEFT
Text
Text text text text
text
text.
*IPDS
For Lexmark T650, T652, T654 and T656dne use 2 if only optional finisher is
installed.
For Lexmark T650, T652, T654 and T656dne use 3 if optional finisher is
installed on top of output expander.
For Lexmark X658de use 2.
*DEVD
*TOPLEFT
or
Short-edge fed
paper, leading edge
Text shown with
0 degree
rotation
specified in
IPDS job
53