Entering Parameters - Setup Menu; System Submenu - Gossen MetraWatt METRAHIT ENERGY TRMS System Multimeter Operating Instructions Manual

Device and Measuring Parameters
6.4 Entering Parameters – SETUP Menu

6.4.1 SYSTEM Submenu

tiME – Set Time
Entering the correct time makes it possible to acquire measured
values in real-time.
MEASURE
1nFo SET
 
...
SETUP
system t iME
FUNC
10:24:34 (hh:mm:ss)
ENTER
Date and time must be reentered after replacing the batteries.
dAtE – Enter Date
Entering the current date makes it possible to acquire measured
values in real-time.
MEASURE
1nFo   SET
...
SETUP
system t iME   dAte
...
dAte set 22.02. (DD: day . MM: month)
2010 (YYYY: year)  
Date and time must be reentered after replacing the batteries.
64
FUNC FUNC
system
ENTER ENTER
FUNC
 
ENTER
FUNC FUNC
system
ENTER ENTER
FUNC
ENTER
FUNC
 
ENTER
FUNC
ENTER
Addr – Set Device Address
See section 7.2 on page 76.
irStb – Status of the Infrared Receiver in the Stand-By Mode
See section 7.2 on page 76 regarding settings.
APoFF – Specified Time for Automatic Shutdown and Continuous On
The instrument is switched off automatically if the measured value
remains unchanged for a long period of time and if none of the
keys or the rotary switch have been activated before the specified
"APoFF" time (entered in minutes) has elapsed.
Automatic shutdown is disabled in the following operating modes:
continuous operation, mains analysis, power or energy measure-
ment and whenever dangerous contact voltage (U > 30 V AC or U
> 35 V DC) is applied to the input (exception: memory mode).
If the on setting is selected, the multimeter is set to continuous
operation and appears in the display to the right of the battery
ON
symbol. In this case, the multimeter can only be switched off
manually. The "on" setting can only be canceled by changing the
respective parameter, or by switching the instrument off manually.
In this case, the parameter is reset to 10 minutes.
MEASURE
1nFo   SET
...
SETUP
system t iME   system APoFF
...
APoFF set: 1 ... 59 min on 
(10 minutes = default setting)
FUNC FUNC
system
ENTER ENTER
FUNC
ENTER
FUNC
ENTER
GMC-I Messtechnik GmbH