Querying Parameters - Info Menu (As Moving Letters) - Gossen MetraWatt METRAHIT ENERGY TRMS System Multimeter Operating Instructions Manual

Menus Page: Header
Parameters
Swell
69: SwELL and diP Limit – Trigger Thresholds for Brief Overvoltages and Undervoltages
system
64: SYSTEM Submenu
tEMPintern 63: tEMP intErn – Query Reference Temperature
tEMPintern 67: tEMP intErn/ExtErn – Select Internal or External Reference Junction External Reference Junction: Specified Temperature SEt
tEMpunit
66: tEMP unit – Select a Unit of Measure for Temperature
t iME
63: tiME /dAtE – Query Time/Date, 64: tiME – Set Time
trig
73: triG – Trigger Conditions for Memory Mode Operation
tstore
74: tStorE – Recording Time (parameter for memory mode operation)
vErSion
63: vErSion /cALdAt – Query Firmware Version and Calibration Date
6.3 Querying Parameters – InFo Menu (as moving letters)
bAtt – Query Battery Voltage
FUNC
MEASURE
1nFo bAtt: 2.75 V.
SETUP ENTER
OCCUP – Query Memory Occupancy
MEASURE FUNC
1nFo bAtt: s ... s 0CCvP: 000.0 %
SETUP ENTER
tiME /dAtE – Query Time/Date
MEASURE FUNC
bAtt:  ...  dAtE: 31.12.2009 (DD.MM.YY)
1nFo
ENTER
SETUP
h = hours, m = minutes, s = seconds
D = day, M = month, Y = year
Date and time must be reentered after replacing the batteries.
GMC-I Messtechnik GmbH
vErSion /cALdAt – Query Firmware Version and Calibration Date
tEMP intErn – Query Reference Temperature
The temperature of the internal reference junction is measured with a tempera-
ture sensor in close proximity to the input sockets.
t iME: 13:46:56 (hh:mm:ss)
FUNC
MEASURE
bAtt:  ... 
1nFo
SETUP ENTER
MEASURE FUNC
bAtt:  ...  1tEMP intern : 24 °C
1nFo
SETUP ENTER
Device and Measuring Parameters
Menu / Submenu Function / Switch Position
SEt/MAinS PQ
SEt/SYStEM All
InFo Temp TC/RTD
Temp TC/RTD
SEt Temp TC/RTD
SEt/SYStEM All
StorE Memory Mode Operation
StorE Memory Mode Operation
InFo Parameters query
caldat : 31.02.10
VEr : 1.00
63