Gossen MetraWatt METRAHIT ENERGY TRMS System Multimeter Operating Instructions Manual page 13

User Interface Symbols in the Following Sections
 
... Scroll through main menu
 
... Scroll through submenu
 
Select decimal point

Increase/decrease value
time
Submenu/parameter (7-segment font)
1nFo
Main menu (7-segment font, boldface)
Symbols on the Device
Warning concerning a source of danger
!
(attention: observe documentation!)
Ground
CAT III / IV Measuring category III or IV device, see also
"Measuring Categories and their Significance per IEC
61010-1" on page 7
Continuous, doubled or reinforced insulation
GMC-I Messtechnik GmbH
Operating Overview – Connections, Keys, Rotary Switch, Symbols
EC mark of conformity
s IR t Position of the infrared interface, window on the top of the
instrument
See also section 3.1 regarding location of the
power pack adapter socket.
5V/600mA
Fuse for current measuring ranges, see section 9.3
This device may not be disposed of with the trash.
Further information regarding the WEEE mark can be
accessed on the Internet at
www.gossenmetrawatt.com under the search term
WEEE (see also section 9.5).
Calibration seal (red seal):
Consecutive number
B0730
German Calibration Service – calibration laboratory
DKD-K-
Registration number
19701
10-02 Date of calibration (year – month)
See also "Recalibration" on page 87.
13