Skipping The Countdown Time; Setting Measurement Intervals - Microlife WatchBP Office Central Instruction Manual

Taking blood pressure measurements (cont.)

Skipping the countdown time

The countdown time before measurement in «SCREEN»
mode and «CENTRAL» mode can be skipped by pressing
the Start/Stop button. While the Start/Stop button is pressed,
the next measurement begins immediately.
Skip the countdown time and
begin measurement.
The device can be set into Standby mode by pressing the Start/
*
Stop button after the completion of measurements. The device
will automatically switch to Standby mode if left unattended for five
minutes.
17
Standby mode
Setting measurement intervals in «CENTRAL»
mode
1) Press and hold the Start/Stop button for 3 seconds.
2) Press the <<M>> button to adjust the measurement
interval, then press the Start/Stop button to confirm.
15 30
60
45
F
The default measurement interval is 15 seconds. The interval can
be set as 15, 30, 45 or 60 seconds.
Press and hold for 3
seconds...