Viewing And Transferring Measurement Data; In «Screen» Mode - Microlife WatchBP Office Central Instruction Manual

Viewing and transferring measurement data

«SCREEN» mode
1) Viewing the average of all measurements
When the last measurement is performed in «SCREEN»
mode, press the <<M>> button to display the average of
three measurements.
2) Viewing MAP and PP values –
Ten seconds after the display of the average blood
pressure value, the device displays values for Pulse
Pressure (PP) and Mean Arterial Pressure (MAP) .
WatchBP Office Central
10
seconds...
3) Viewing individual measurements – All individual
readings can be viewed by repeatedly pressing
the <<M>> button. The display will flash a number
before the reading to indicate the sequence of the
measurement.
3
4) Values of the individual measurement (including PP
and MAP values) will be displayed in the order listed in
step 2.
1
2
26
EN