Abi» Mode - Microlife WatchBP Office Central Instruction Manual

«ABI» mode
1) Turn on the power – Turn on the device by switching
the On/Off switch at the back of the device to the ON
position.
2) Switch to «ABI» mode
3) The supine position reminder will display to notify that the
patient must lie down.
ABI CENTRAL SCREEN
ABI
ABI CENTRAL SCREEN
WatchBP Office Central
4) Apply the cuff* – Properly fit the arm cuff to the upper
arm and the ankle cuff to the leg of the preferred
measurement side of the body. The preferred arm is the
arm with the higher blood pressure value, which can be
determined in «SCREEN» mode.
5) Make sure the upper arm cuff is connected to the left cuff
socket and the ankle cuff is connected to the right cuff
socket.
F
Additional instruction can be found on the cuff.
ABI CENTRAL SCREEN
18
EN