Central» Mode - Microlife WatchBP Office Central Instruction Manual

«CENTRAL» mode
Select «CENTRAL» mode to perform central blood pressure
measurements on the preferred arm for prompt and accurate
office measurements.
ABI CENTRAL SCREEN
Automated duplicate measurements
In «CENTRAL» mode, the WatchBP Office Central device
automatically takes two consecutive measurements at 15
second intervals on default. At each measurement brachial
blood pressure is measured first, thereafter the cuff pressure
will be hold around 60 mmHg for 30 seconds for assessing
the central blood pressure value. the readings of the two
brachial blood pressure values are averaged and displayed
and the readings of the two central blood pressure values are
averaged and displayed after the measurement process is
finished. For verifying each measurement separately press
the <<M>> button to see the 2
<<M>> button again to see the 1
ABI CENTRAL SCREEN
F
The user can manually set measurement intervals of 15, 30,
45 or 60 seconds in CENTRAL mode. (Please see "Setting
measurement intervals" at page 17))
WatchBP Office Central
measurement, press the
nd
measurement.
st
2
1
15 seconds
10
EN