How To Use This Manual - Flashforge Dreamer User Manual

A

How to use this manual

.
This user manual is divided into four chapter for ease of navigation
and will use examples based on Microsoft Windows 7 operating system.
The first chapter lays out the guide on setting up the Dreamer and
preparing for its first print. You will learn the ins and outs of FlashPrint
software in the second chapter. The third portion is the actual printing and
covers the procedures for various methods of printing and techniques.
The last chapter includes information regarding obtaining support.
PRECAUTION:
Prior to powering on the Dreamer, make sure the power supply switch is set
to 115V if you are located in the United States and Canada. For other
countries, please refer to your country's AC output voltage. Failure to do so
will damage the mainboard . For instructions on how to do this, please refer
to page 14.
Please make sure to read this section carefully prior to setting up
and operating the Dreamer.
·
The Dreamer is very sensitive to static electricity, so please make sure
you contact a grounded object before operating the machine.
·
Before repairing or making any alterations to the Dreamer, it is essential
that the machine is turned off, and the power cord is unplugged.
·
The Dreamer operates at a very high temperature; allow the nozzle,
extruded plastic and heating plate to cool before touching.
·
Certain types of plastic filament may give off a slight odor when
heated. Because of this, the Dreamer should always operate in a
well-ventilated area.
·
Do not leave the Dreamer unattended when in operation.
Dreamer User Guide | www.ff3dp.com
5