Oki OKIOFFICE84 Maintenance Manual page 92

Table 2.9.4 (4/5) User's Initial Settings (One-touch key Program)
F+OT
Item
No.
2. Dial parameters
3. Clock adjustment
4. System data program
5. Personal box programming
6. Memory password program-
ming
40672201TH Rev. 4
Specifications
1. REDIAL TRIES
2. REDIAL INTERVAL
3. DIAL TONE DETECT
4. BUSY TONE DETECT
5. MF (TONE)/DP (PULSE)
6. PULSE DIAL RATE
7. PULSE MAKE RATIO
8. PULSE DIAL TYPE
9. MF(TONE) DURATION
10. PBX LINE
11. FLASH/EARTH/NORMAL
12. AUTO START
13. DIAL PREFIX
Refer to Table 2.9.6 for specification of dial parameter
settings.
Date and time adjustment.
(1) TSI/CSI (except for SUI and AUT)
Registration of TSI/CSI/CIG (numbers, + and space) in
20 digits.
TSI: Transmitting Subscriber Identification
CSI: Called Subscriber Identification
CIG: Calling Subscriber Identification
(2) SENDER ID
Registration of sender ID (alphabetic, numeric and sym-
bolic) in 32 digits.
(3) CALL BACK NO.
Registration of telephone number for call-back message
(alphabetic, numeric and symbolic) in 20 digits.
To allow the operator (in this case, a person who wishes to
assign a password to personal box) to assign a two functions
to 8 personal-box.
(a) Confidential RX
(b) Bulletin Polling TX
Used with confidential RX and Bulletin polling TX and Ad-
vanced T30 protocol. Personal box setting for Bulletin poll
using SEP frame and Confidential using SUB frame when
remote machine has a SEP/SUB capability.
The box No. 0 is used for only global Bulletin Polling TX.
Registering the password required (4-digit numerals) for
outputting the data received by Memory Only Reception
mode or change from Memory Only Reception mode. When
the four-digit numeric password is registered. The password
input is required upon outputting documents or change from
Memory Only reception mode.
2 - 48