Oki OKIOFFICE84 Maintenance Manual page 83

1) User's Functions
No. Item
1 Auto dial
1) One-touch dial
2) Two-digit dial
3) Keypad dial
4) Chain dial
5) Mixed dial
2 Manual dial
3 Receive mode
1) Auto receive mode
2) Manual recevice mode
3) Telephone/fax automatic
switchover
Table 2.9.3 (1/5) User's Functions
10 one-touch keys are provided.
Max. 32 digits for each location number.
In addition to an ordinary location number, another alternate
location number can be registered in to each one-touch key.
Purposes of this alternate location number:
1) Fax dial
A fax number is registered as an alternate location
number. When a call to the first location number is not
answered, the alternate location number will be auto-
matically dialled.
70 different codes are provided.
* Two- digit location code: 01 to 70
Max. 32 digits for each location number.
With ten-key pad.
Max. 40 digits for one operation
The number of dialling digits can be expanded to longer digit
numbers by chaining any number of the above 1), 2) and 3).
Type of dialling can be changed from pulse dial to tone dial
halfway in dialling process.
The changing point is specified by the * key. This feature is
not available in all countries.
With a telephone handset.
Selectable by key operation.
Selectable by key operation.
Selectable by key operation.
The fax recognizes a fax call from a verbal call as follows:
If the fax detects a call with a CNG signal, it starts an
automatic document receive operation.
If it detects a call without a CNG signal, it sounds the buzzer
to indicate a voice call. Operator can answer the call by lifting
the telephone handset.
If he or she does not lift the handset within predetermined
time (20 sec. or 35 sec.), the fax automatically starts a
document receive operation.
* FP + 10 (To determine the timer.)
Note: Refer to page 2-36.
2 - 39
Specifications
40672201TH Rev. 4