Oki OKIOFFICE84 Maintenance Manual page 91

Table 2.9.4 (3/5) User's Initial Settings (One-touch key Program)
F+OT
Item
No.
8 Location program
1. One-touch key
2. Two-digit auto dial program
3. Group setting
9 User's programs
1. Function program
Specifications
One-touch keys allow registering:
(1) Telephone number (numeral, -, P and space) in 32 digits.
(2) Alternate fax telephone number in 32 digits.
(additional registration)
(3) ID for the telephone directory function in 15 characters
(alphabetic, numeric and symbolic).
(4) 10 one-touch keys are provided.
Auto-dial No. 01 to 70 allows registering telephone number
in 32 digits (numeral, -, P and space) and ID for the telephone
directory maximum 15 characters (alphabetic, numeric and
symbolic).
Grouping some one-touch keys and some two-digit auto dial
codes to which telephone numbers have been assigned.
Five group programming are available.
The group programming makes multiple polling reception
and broadcast operation simple.
01: MCF (SINGLE-LOC.)
02: MCF (MULTI-LOC.)
03: ERR. REPORT (MCF.)
04: IMAGE IN MCF.
05: SENDER ID
06: MONITOR VOLUME
07: BUZZER VOLUME
08: CLOSED NETWORK
09: TX MODE DEFAULT
10: T/F TIMER PRG.
11: RING RESPONSE
12: DISTINCTIVE RING
13: 1'ST PAPER SIZE
14: USER LANGUAGE
15: INCOMING RING
16: REMOTE RECEIVE
17: MEM./FEEDER SW.
18: POWER SAVE MODE
19: ECM FUNCTION
20: REMOTE DIAGNOSIS
21: PC/FAX SWITCH
22: NO TONER MEM RX
23: MEM FULL SAVE
24: CONTINUOUS TONE
25: INSTANT DIALING
26: RESTRICTED ACCESS
27: WIDTH REDUCTION
28: ONE TOUCH PARAMETER
Refer to Table 2.9.4 for specification of the function programs
No. 01 through 28.
2 - 47 40672201TH Rev. 4