Oki OKIOFFICE84 Maintenance Manual page 70

T.F.
No.
31 ID/TSI priority
32 Toner Count Clear
33 Parallel Pick Up
40672201TH Rev. 4
Table 2.9.1 (7/7) Service Personnel Initial Settings
Item
Selects ID/TSI printing in the distant station ID
column of the report.
ID:
TSI:
Priority
Note: LCD display and Report printing gives
Enables or disables the clear operating of Toner
Counter Clear (OT7) without Service bit ON/OFF
(TF01).
ON:
OFF:
To control a receiving fax by 2 digits (the same
digits as remote reception) from a telephone set
connected parallel to the telephone line.
ON:
OFF:
(For the details, see Appendix A3, Section 4.5.
Outline of Parallel Pick Up.)
Specifications
Prints NSF signal with personal ID.
Prints TSI signal without NSF.
Set to ID
TX RX
1 Personal ID Personal ID
2 CSI TSI
3 Dial ID Dial ID
4 Dial No. Dial No.
preference to TSI/CSI signal than Per-
sonal ID.
Enables
Disables
To enable
To disable
2 - 26
Set to TSI
TX RX
CSI TSI
Dial No. Dial No.
Personal ID Personal ID
- -
Default