Oki OKIOFFICE84 Maintenance Manual page 103

RESOLUTION & ORIGINAL of Tx mode defult setting can be selected by using → key.
Note1:
STD / NORMAL
EX. FINE / NORMAL
EX. FINE / DARK
Note2: When the service bit is set to "off" and the corresponding bit of XPARA of national code is
set to "off", Ring response and/or Distinctive ring is bypassesd as follows:
(bypass)
STD / DARK
FINE / LIGHT
EX.FINE / LIGHT
PHOTO / LIGHT
(bypass)
11:RING RESPONSE
←
[ X ] YES(
12:DISTINCTIVE RING
←
[ X ] YES(
18:POWER SAVE MODE
←
[ X ] YES(
2 - 59
STD / LIGHT FINE / NORMAL
FINE / DARK
PHOTO / NORMAL
→
) NO( )
→
) NO( )
→
) NO( )
PHOTO / DARK
40672201TH Rev. 4