Oki OKIOFFICE84 Maintenance Manual page 136

e) First, move the center of Guide-paper
(L) and (R) of Holder assembly, and
then, open the Cover-Main from the
rear side.
f) Board-NCU:
Remove the Board-NCU by removing
the two screw 3 and disconnect the
connector (CN3) from Board-NCU.
Note : Board-NCU can be removed without removing the Cover-Main.
(2) Reassembly procedure
Reverse the disassembly procedures.
40672201TH Rev. 4
Holder assembly
4 - 8
Cover-main
Guide-paper (R)
Guide-paper (L)
(CP4.1 Fig. 08)
Board-NCU
OR
Screw 3
(CP4.1 Fig. 09)