Oki OKIOFFICE84 Maintenance Manual page 60

(STANDBY MODE)
F (Press the SELECT FUNCTION key.)
SELECT FUNCTION (OT)
Selection by One-touch key
OT1: DELAYED TX
OT2: PRINT OPERATION
OT3: CONFIDENTIAL TX
OT4: RELAY INITIATE TX
OT5: POLLING TX/RX
OT6: REPORT PRINT
OT7: COUNTER DISP (CLEAR)
OT8: LOCATION PROGRAM
2
To OT9 or OT10
Note: When the machine is in POWER SAVE MODE, the machine returns to standby mode by pressing the START key.
*1: In case of Germany, Austria and Switzerland version, ACTIVITY REPORT message does not appear on the LCD display.
*2: User can read no. of counter in LCD but can not clear.
S : Effective if the service bit is set to ON.
40672201TH Rev. 4
[Prg. Start date (0-9) and start time (0-9)]
[Enter 2-digit (0-64)]
[Prg. Password 4-digit (0000-9999) & Remote list No. 2-digit (01-99)]
Selection by YES/NO keys or digit (1 to 6)
*1
1: ACTIVITY REPORT
2: BROADCAST MCF.
3: ACTIVE MEM. FILES
4: PHONE DIRECTORY
5: CONFIGURATION
6: PROTOCOL DUMP
S
LOG. REPORT
Selection by ← key or → key
(Display & Clear)
(Service bit = ON)
or
Service bit = OFF
& TONER COUNT
CLEAR = ON
S
*2
*2
Selection by OT, A/D, # or SEARCH
OT: ONE TOUCH KEY PRG.
A/D: AUTO DIAL KEY PRG.
#: GROUP SETTING
2 - 16
COPY COPY X2
1
To technical program
PRINT MEMORY MSG.
PRINT PERSONAL BOX
→ key
→ key
→ key
→ key
→ key
→ key
→ key
DRUM COUNTER
→ key
TONER COUNTER
→ key
DRUM (Total) COUNTER
→ key
PRINT COUNTER
→ key
SCAN COUNTER
→ key