Oki OKIOFFICE84 Maintenance Manual page 65

T.F.
Item
No.
06 TAD mode
(For external telephone answering
device.)
07 Real time dialing
08 TEL/FAX switching
Table 2.9.1 (2/7) Service Personnel Initial Settings
Switches an automatic voice message response
to the calling station.
TAD mode is of three types (TYPE1/TYPE2/
TYPE3).
OFF/TYPE1/TYPE2/TYPE3 selectable.
TYPE1 means:
1. RING comes.
2. The TAD answers, returns the recorded voice
message in TAD to calling party.
3. The FAX machine will continue to detect CNG
signal while TAD works.
4. If the FAX machine detects CNG signal, the
fax will go into normal receiving mode.
5. Even though the fax does not detect CNG
signal, the fax will go to receiving mode in
hook-on condition.
TYPE2 means:
The function from No. 1 to No. 4 of upper TYPE2
are the same as TYPE1.
5. If the fax does not detect CNG signal during
TYPE3 means:
The function from No. 1 to No. 2 of upper Type 1
are the same as TYPE1.
3. The fax does not detect CNG signal during 15
4. The fax starts CNG detection after 15 sec-
5. If the fax does not detect the CNG during TAD
Enables or disables the real time dialling.
3 types selectable. (OFF/TYPE1/TYPE2)
TYPE1: Real-time dialling is available when the
TYPE2: Real-time dialling is available when the
Enables or disables the TEL/FAX automatic
switching.
ON :
OFF : Disable
(Related item: FP10, TF23)
Specifications
working of TAD, the machine will go to standby
mode.
seconds from TAD operation starting.
onds from TAD operation. If the CNG is
detected, the fax goes to the normal receive
mode.
operation, the fax goes to standby mode.
telephone handset is OFF-HOOK.
telephone handset is OFF-HOOK or
HOOK key is pressed.
Enable
2 - 21
Default
40672201TH Rev. 4