Oki OKIOFFICE84 Maintenance Manual page 141

Facsimile transceiver

Hide thumbs Also See for OKIOFFICE84:

Table of Contents

Remove the Motor-S by removing the

connector of motor and the two screws 1.

Photo-Sensor (PC1, PC2):

After disconnecting the two connec-

tors, remove the photo-coupler sen-

sors PC1 and PC2 on the Plate Scan-

ner B by pressing the latch using the

flat screwdriver or like.

(2) Reassembly procedure

Reverse the disassembly procedures.

Plate Scanner B

(CP4.1 Fig. 19)

(CP4.1 Fig. 20)

40672201TH Rev. 4

Chapters

Table of Contents