Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation and Structure
»» IP/Default Gateway
Write security: 3; Read security: 5
The default gateway is used by the Express L128FP for sending IP
packets whose destination address is not found in the route table. If
this address is all zeros, then the first WAN connection becomes the
default gateway.
»» IP/Static Routes
Static Routes can be inserted under this menu.
Static Routes/Active
Write security: 4; Read security: 5
Adds this static route entry to the IP routing table when set to Yes
(def) and removes it (if it was previously added) if set to No.
Static Routes/IP Address
Write security: 4; Read security: 5
This is the IP address of the host or network address of the device be-
ing routed to.
Static Routes/Subnet Mask
Write security: 4; Read security: 5
This mask determines the bits in the previous IP address that are used.
If this is to be a host route, it must be set to all ones (255.255.255.255).
Static Routes/Gateway
Write security: 4; Read security: 5
This is the IP address of the router to receive the forwarded IP packet.
Static Routes/Hops
Write security: 4; Read security: 5
This is the number of router hops required to get to the network or
host. Maximum distance is 15 hops.
61202070L4-20
Express L128FP User Manual
3-13
Advertisement
Table of Contents
