Table of Contents
Advertisement
particular router's protocol packets are bridged. A setting of No
means that no bridging will occur.
Bridge Map/Bridge Group
Write security: 3, Read security: 5
The bridge group that this DLCI is part of is specified here as Group
1 or Group 2. These groups correspond to the spanning tree protocols
Bridge Group 1 and Bridge Group 2.
DLCI Mapping/Filters
The Express L128FP can block packets in and out of a PVC port by use
of the filters. They are set up in two steps: 1) define the types of packets
that would be of interest in the Configuration/Security/Filter De-
fines menu, and 2) set up the filter type and combination of defines
that will cause a packet block.
Filters/In from PVC
Write security: 2; Read security: 5
The packets which come into the Express L128FP via this PVC can be
filtered in three ways:
Disabled
(def)
Block All
Forward All All incoming packets from this PVC are not
61202070L4-20
Chapter 3. Terminal Menu Operation and Structure
Turns off packet input filtering. No incoming
packets from this PVC are blocked.
All incoming packets from this PVC are blocked
except as defined in the Filters/In Exceptions
list.
blocked except as defined in the Filters/In Ex-
ceptions list.
Express L128FP User Manual
3-39
Advertisement
Table of Contents
