Table of Contents
Advertisement
WAN IP Bridge/Netmask
Write security: 2; Read security: 5
This is the network mask to be applied to the virtual Ethernet port.
WAN IP Bridge/Triggered
Write security: 2; Read security: 5
When set to Yes, only IP RIP updates are sent when the routing table
has changed. When set to No (def), updates are sent periodically.
RIP version, method, and direction are determined by the
Ethernet parameters set in the Configuration/IP/IP
Router/RIP menu.
WAN IP Bridge/Proxy ARP
If this option is set to Yes (def), the Express L128FP will proxy ARP on
the bridge IP port. See the section IP/Proxy ARP on page 3-18 for an ex-
planation of the proxy ARP function.
»» Bridge/WAN IPX Bridge
When IPX routing is active, the Express L128FP will allow another
WAN device to bridge IPX packets to it using PPP BCP. Normally,
two IPX routers would negotiate PPP IPXCP to exchange IPX packets.
However, if a device can only support PPP BCP, IPX packets are en-
capsulated by the device as bridge packets. The Express L128FP can
treat the WAN IPX Bridge as a virtual Ethernet port connected only to
a WAN device which has negotiated PPP BCP. This menu allows the
IPX parameters for this virtual Ethernet to be set up.
WAN IPX Bridge/Network
Write security: 2; Read security: 5
This is the network address of the virtual Ethernet port. See IPX/Net-
work on page 3-19 for an explanation of the IPX network number.
61202070L4-20
Chapter 3. Terminal Menu Operation and Structure
Express L128FP User Manual
3-23
Advertisement
Table of Contents
