Sessions/Spanning Tree; Status/Arp Cache - ADTRAN Express L128FP User Manual

Chapter 3. Terminal Menu Operation and Structure
Tx Throughput Current transmit rate of this DLCI
Rx Throughput Current receive rate of this DLCI
De Count
Cr Count
Becn Count
Fecn Count
»» Sessions/Spanning Tree
Read security: 5
When Bridge mode and Spanning Tree mode are active, this reflects
the current state of the LAN and WAN ports. The following can ap-
pear:
Off
Disabled
Listening
Learning
Forwarding
root
designated
Blocking
» Status/ARP Cache
Read security: 5
This lists the contents of the Express L128FP's ARP table. All resolved
cache entries time out after 20 minutes. Unresolved entries time out
in 3 minutes.
3-60
Number of packets received on this DLCI
with the De bit set
Number of packets received on this DLCI
with the Cr bit set
Number of packets received on this DLCI
with the Becn bit set
Number of packets received on this DLCI
with the Fecn bit set
Appears when Spanning Tree mode is disabled
Port is not connected (for WAN) or disabled in
configuration
Port is in the listening state
Port is in the learning state
Port is in the forwarding state with the follow-
ing possible properties:
is the root port
is designated port
Port is in the blocked state
Express L128FP User Manual 61202070L4-20