Table of Contents
Advertisement
Loop Status Messages
Appendix A
The Express L128FP displays current loop status of the IDSL on the
bottom center line of the terminal screen. The following messages are
defined:
Connected
This is seen when the Express L128FP IDSL layer 1 is up. The rate is
determined by what it is configured for under Configuration/WAN/
IDSL/Rate.
Echo: Tx: X Rx: Y
The current transmit and receive count for the PPP echo request test.
Layer 1 up
The Express L128FP's IDSL layer 1 is up.
Link down
The IDSL link is not synchronized.
Link In Sync
The IDSL link is synchronized but layer 1 is not up.
NET EOC LOOPBACK
Express L128FP has received an IDSL EOC loopback command from
the far end.
RINGING
An incoming call is ringing.
61202070L4-20
Express L128FP User Manual
A-1
Advertisement
Table of Contents
