3 - 16 MP6000 INTEGRATOR GUIDE
Install the Customer Side Scanner (MX101)
The MX101 is an optional modular unit that fits into a modified MP6000 tower and is used for customer
scanning. The unit can be installed on either the left or right side of the MP6000.
Remove all hardware from the packaging. The packaging contains the MX101 scan module and window;
MP6000 modified rear tower; USB cable; and MX101 identification label (Regulatory Guide; instructions to affix
the label on the MP6000; and installation instructions not shown).
Parts of the MX101
Figure 3-14
Tower
Scan Module and Window
USB Cable
Identification
Label