Table of Contents
Advertisement
B - 2
MP6000 INTEGRATOR GUIDE
MP6000 Technical Specifications
Table B-1
Item
Power
Data Ports
Scale
Horizontal Platter
User Interface
12VDC from POS interface cable (USB PowerPlus, RS-232 or
•
RS-485)
•
Zebra PWRS-14000-148R power supply: 90-264 VRMS (110-240
nominal), 47-63Hz (50-60 nominal).
NOTE If a power supply plug is inserted to the J1 connector, with no voltage to the
power supply, the scanner will not power up.
The MP6000 GEN I has two operating modes with corresponding power
requirements (typical):
•
Idle Mode
< 5 W
•
Active Mode 5 W average, < 12 W peak.
The MP6000 GEN II has two operating modes with corresponding power
requirements (typical):
•
Idle Mode
< 3.75 W
•
Active Mode 8.25 W average, < 12 W peak.
One shared POS port for USB / RS-232 / IBM RS-485
•
Three USB peripheral ports
•
•
Two powered RS-232 peripheral ports
•
Checkpoint interlock port
•
Scale Display port
•
Internal scale port
30 lb. in 0.01 lb. increments/15 kg in 5 g increments
•
Maximum static weight: 300 lb./136 kg
•
Scale can be added after scanner installation (most countries)
•
•
Single-cable and dual-cable protocols
•
Options:
•
Dual-interval Zebra scale
• 0-12 lb. in 0.005 lb increments and 12-30 lb in 0.01 lb
increments
• 0-6 kg in 2 g increments and 6-15 kg in 5 g increments
•
Single-head and dual head Scale Displays
• Dual heads rotate fully independently for widest viewing angles
on the market
•
Sapphire glass
•
Integrated produce bar
•
Soft-touch capacitive pads (no buttons to break or wear out)
•
Wide, centrally located two-color decode/information bar (clear for
cashiers and self checkout users)
•
Beeper: adjustable volume and tones
•
Three programmable buttons
Description
Advertisement
Table of Contents
Troubleshooting
