Table of Contents
Advertisement
Insert the scan module into place facing out of the opening of the CSS tower cover. Ensure the grommets
6.
on the scan module align with the sockets in the tower cover, and push into place.
Scan Module
Grommets (3)
Grommet
Sockets
(3)
CSS Tower
Cover
Inserting the Scan Module
Figure 3-19
Snap the scan window cover into place on the tower, over the CSS scan window.
7.
Snapping the Scan Window Cover in Place
Figure 3-20
NOTE Ensure you hear and feel three distinct snaps: one for each snap mechanism (lower, front, rear), to ensure
a snug fit in the rear tower.
SITE PREPARATION AND INSTALLATION 3 - 19
Module
Installed
Advertisement
Table of Contents
Troubleshooting
