Motorola MP6000 Integrator Manual page 177

Beeper and LED Indicators (Continued)
Table 5-1
Condition Beeper Indication
Macro PDF buffer 3 Long Low Beeps
out of memory
Macro PDF bad 4 Long Low Beeps
symbology
encountered
Macro PDF buffer 5 Long Low Beeps
flushed
Macro PDF Fast Warble Beep
aborted
Macro PDF buffer Low, High Beeps
flushed with no
data
Scale: See Table 4-6 on page 4-21
Standard Use
System power-up Low, Medium, High
Beeps
System reboot Loud two seconds
beep
Bar code decoded Off, Low, Medium,
High, two-tone beep,
or TBD tone
(programmable)
System is idle None
System is None
disabled
Bar code data 4 Low Beeps
transmission error
Bar code data 5 Low Beeps
conversion error
RS-232 host Low, Low, Low, Extra
parity error Low Beeps
System LED
Indication
No change
No change
No change
No change
Red
for scale conditions and displays.
None
No change for
10 seconds. Red
for last two
seconds.
Fan-out LED
sequence.
Dim green
(center LED
only)
No change, red:
warning
Red
Red
Red
OPERATING THE SCANNER 5 - 23
Button LED
Indication
No change Out of memory. There is not
enough buffer space to store the
current MPDF symbol.
No change Bad symbology. Scanned a 1D or
2D bar code in a MPDF sequence,
a duplicate MPDF label, a label in
an incorrect order, or trying to
transmit an empty or illegal MPDF
field.
No change Flushing MPDF buffer.
No change Aborting MPDF sequence.
No change Flushing an already empty MPDF
buffer.
No change Power up.
No change After holding the EAS and Volume
buttons for 10 seconds, the
MP6000 reboots.
No change MP6000: LEDs arranged in a
linear fashion will turn on in
sequence; Center, then the two
immediate surrounding LEDs, then
the two outermost LEDs.
No change Ready for decode.
No change Host application has sent
SCAN-DISABLE command.
No change Transmission error.
No change Conversion or Format error.
No change RS-232 Receive error.
Description