Bay Trim (Optional); Louvers - Bay - Masport FireGenie PG33-NG Owners & Installation Manual

INSTALLATION
Optional Bay Trim
Attach 4 supplied magnets each to the back of
the top and bottom trim pieces, and attach trim
to the top and bottom of Bay door.
36
BAY LOUVERS
1) Remove flush louver top heat shield by
removing the 4 screws.
Flush Louver
Top Heat Shield
2) Install the bay louver top heat shield and
secure with 4 screws.
Bay Louver Top
Heat Shield
3) Install top louver by sliding the two bracket
clips into the brackets located on top of the
bay door. See below. The fitted louver
leaves a small gap between faceplate bot-
tom and louver top.
4) Install bottom louver by sliding the two
bracket clips into the brackets located un-
derneath the bay door. Secure with 1 screw
into each Bottom Louver Mounting Bracket
as per diagram below. Use the bottom hole
in the bracket.
5) Slide the valve extension knobs onto the
valve knobs. Match the correct ext. knob
with the valve knob.
Masport PG33 Gas Inbuilt