Louvers - Flush; Flush Louvers; Double Screen Door; Bay Front (Optional) - Masport FireGenie PG33-NG Owners & Installation Manual

FLUSH LOUVERS

1) Install the top louver by sliding the two
bracket clips into the brackets located un-
derneath the top of the firebox.
2) Install the bottom louver by folding the lou-
ver down and then sliding the Bottom Lou-
ver bracket down onto the 2 pins on the
base of the unit (dia. 1). Secure with 1
screw as per diagram 2.
Diagram 1 Diagram 2
Note: Top and bottom louvers are different.
Masport PG33 Gas Inbuilt
DOUBLE SCREEN
DOOR
1) Pull out the top louver.
2) Center the screen door and hook over the
flush door.
3) Open the screen door(s) and secure the
screen door to the flush door front with 2
clips on the bottom left and right side.
Clip locations
Clip installed on right side.
INSTALLATION

OPTIONAL BAY DOOR

The Bay louvers MUST be used
with the Bay glass option.
The optional Bay door is an overlay on the
flush front. The standard flush door and glass
must remain on the unit.
1) Hook the top of the bay door over the flush
door flange and swing the bottom against
the bottom flange of the flush door.
2) Secure to the flush door bottom bracket with
2 screws provided.
3) Slide the valve extension knobs onto the
valve knobs.
Note: If any maintenance etc. must be
done in the firebox, first remove
the Bay louvers and door.
35