Table of Contents
Advertisement
═════════════════════════════════════════════════════════════════
Connecting the ASAP
One or more DSL filters may be required – available from most
consumer electronics stores. Connect your filters as shown:
1. Connect the filter(s) together in series. Be sure to
install the "Wall" and "Phone" connections of the
filter properly.
2. Plug one end of the connected filters into the
telephone (wall) jack.
3. Plug the other end into the TEL LINE port on the
ASAP 104.
The filters keep the DSL signal from interfering with the
operation of the ASAP 104.
═════════════════════════════════════════════════════════════════
Connecting telephone equipment to the ASAP
This section illustrates 2 typical applications using the ASAP 104. The ASAP 104 is capable of routing calls to any data device,
system or system of devices that can answer a standard phone company ring signal.
If your application requires additional information or support, call our toll-free, Technical Service team at: 800-288-6794.
═════════════════════════════════════════════════════════════════
Application Number 1:
Typical Connection for a retail store
COMPUTER
COMPUTER
MODEM
MODEM
Time and
Time and
Attendance
Attendance
System
System
(#44)
(#44)
In this application, 3 different computers/systems connect to the ASAP 104, (POS, Energy Management, and
Time and attendance) as well as a telephone.
This allows inbound and outbound telephone calls during normal business hours, and automated polling of the
connected data devices after hours. Access to the data devices can be accommodated by access codes in the dialing of
the calling computer. The ASAP 104 can also be shut down (on all ports or individually) completely to inbound calls
depending on application requirements.
®
104 to a DSL Phone Line
COMPUTER
MODEM
Point-of-Sale
Terminal (POS)
(1100Hz or #22)
®
104
COMPUTER
MODEM
Energy
Management
System
(1300Hz or #33)
9
COMPUTER
MODEM
Time and
Attendance
System
(#44)
Advertisement
Table of Contents
