═════════════════════════════════════════════════════════════════
Installation at the DEMARC
SINGLE LINE INSTALLATION ON LINE 1
For use in the Automatic mode to allow the ASAP 104 control over all phones on the line.
The following diagram shows an installation at the point of DEMARC on line 1. Once connected in this configuration, the
telephones will never ring on an inbound call if the ASAP 104 transfers to port P2, P3 or port P4. Only calls that do not
produce transfer tones will ring the telephones.
═════════════════════════════════════════════════════════════════
SINGLE LINE INSTALLATION ON LINE 2
7