Automatic No Answer Transfer; Automatic Primary Port Transfer - Command Communications ASAP 104 Installation And Reference Manual

═════════════════════════════════════════════════════════════════

Automatic No Answer Transfer

Operates in either the Automatic or Semi-Automatic mode.
This feature is designed to transfer calls that do not produce identifying tones to the appropriate port.
The ASAP 104 will ring the Primary port 6 times (Rings to Ports P__). If the call remains unanswered after 6 rings, the
ASAP 104 will transfer the call to the Secondary port.
The factory setting for Automatic No Answer Transfer feature is ON.
If the Automatic No Answer Transfer feature is turned OFF, the ASAP 104 will operate as follows:
Semi-Automatic mode
The call will continue to ring as long as the caller
stays on line without transferring.
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 0 * (three beeps) * (one
beep)
3. Hang up the phone
═════════════════════════════════════════════════════════════════

Automatic Primary Port Transfer

Operates in either the Automatic mode or the Semi-Automatic mode.
This feature is designed to work in conjunction with an answering machine to transfer calls that do not produce identifying tones
to the appropriate port.
If the answering machine answers a call and is on line for less than 30 seconds (Primary Port Transfer Timer) the ASAP 104
will transfer the call to the Secondary port. If the call is on line for more than 30 seconds, the ASAP 104 will simply reset for the
next call when the answering machine disconnects.
If the Automatic Primary Port Transfer feature is turned OFF, the ASAP 104 will reset each time the answering machine
disconnects from a call. No transfer to the Secondary port will occur when the answering machine disconnects from a call.
The factory setting for Automatic Primary Port Transfer feature is OFF.
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 1 * (three beeps) * (one
beep)
3. Hang up the phone
Automatic mode
The call will ring 6 times to the Primary port without
transferring, then reset for the next call. The next
incoming call will be processed with Ring Reduction
activated as well as associated features and feature
settings.
To turn this feature ON:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 1 0 * (three beeps) * (one
beep)
3. Hang up the phone
To turn this feature OFF:
1. Take the phone in port P1 off-hook
2. Press # * (three beeps) 0 1 * (three beeps) * (one
beep)
3. Hang up the phone
23