Installation With A Single Telephone Line - Command Communications ASAP 104 Installation And Reference Manual

═════════════════════════════════════════════════════════════════

Installation with a single telephone line

The following diagram shows a typical installation with a single line telephone.
NOTE:
If you have a stand alone Caller ID device, simply plug the device into the Primary port (port P1 default), and then plug the phone
into the Caller ID.
This installation is for use in the Semi-Automatic mode, or for the
Automatic mode with a phone connected to the Primary port (port
P1 default). (Extension phones not connected to the Primary port
in the Automatic mode will ring only 1 time on an inbound call.
See "Installation at the DEMARC" for an alternate installation.)
The factory setting for Caller ID operation is ON. See "Programmable
features of the ASAP 104" for more information.
8