Computer Calls Using Distinctive Ring Service From The; Telephone Company; Comscan ® Scanning / Intercom - Command Communications ASAP 104 Installation And Reference Manual

Table of Contents

Advertisement

═════════════════════════════════════════════════════════════════
Computer calls using Distinctive Ring Service from the Telephone Company
As previously described, the ASAP 104 is
capable of routing calls based upon the phone
company's Distinctive Ring service. Each
telephone device is designated to a specific port
and ring signal on the ASAP 104. Callers
═════════════════════════════════════════════════════════════════
®
ComScan
Scanning / Intercom
The ASAP 104 converts your fax machine into a full
page, multi-document scanning system by using the
built-in ComScan feature.
To scan a document through the ASAP 104, connect a
fax/modem or fax/modem card to port P4, and a fax
machine to port P2. Once your equipment is connected
properly, perform the following steps:
1. Set the fax/modem in "receive fax" on a 1 or 2 ring
answer.
2. Insert the document to be scanned into the fax
machine and take the fax machine's phone receiver
off-hook and press * * 4 4.
If the ASAP 104 is installed with phones connected to all ports, this feature also allows an intercom path between ports.
To make an internal call to another port, perform the following procedures:
1. Take a phone connected to the ASAP 104 off-hook.
2. Press one of the following transfer codes from a tone phone:
* * 1 1 for port P1
* * 2 2 for port P2
* * 3 3 for port P3
* * 4 4 for port P4
3. Replace the phone receiver on-hook when finished.
16
simply dial the specific phone numbers
assigned to the desired device and the ASAP
104 transfers the call as described in the section
Distinctive Ring service.
3. When your fax/modem answers, press the fax
machine's start button and return the phone receiver
to its cradle.
After you complete these steps, your fax/modem will
receive the document and store it as any received fax.
You can then retrieve the document using your
fax/modem's software to make changes or store it
electronically. (There are many software packages on
the market that allow you to modify a fax received by a
fax/modem, see your local computer software dealer.)
Simply reverse the process to send a print job to your
fax machine from your computer * * 2 2.

Advertisement

Table of Contents
loading

Related Products for Command Communications ASAP 104

Table of Contents