Table of Contents
Advertisement
═════════════════════════════════════════════════════════════════
Connecting the ASAP
This section explains how to install the ASAP 104 in most phone configurations that appear in a home or office. You can install the
ASAP 104 into one of the following phone configurations:
•
A telephone system
•
A single telephone line (at the DEMARC)
•
A single telephone line (at an existing RJ11 jack)
Installation procedures for each of these configurations are provided in the following sections, as well as connecting telephone
equipment to the ASAP 104.
═════════════════════════════════════════════════════════════════
Installation on a telephone system
The diagram shows telephone devices connected to the ASAP
104 for a telephone system; follow the same procedures for a
mini-telephone system. For the ASAP 104 to operate
properly, it must be "in front" of the telephone system.
Connect the other equipment as needed.
All equipment on that line (telephone system, fax, computer
modem, and so on) must connect directly to the ASAP 104.
CAUTION: Do not plug the ASAP 104 into a telephone
system phone jack. You may damage the phone system or the
ASAP 104.
═════════════════════════════════════════════════════════════════
Installation on a telephone system using a 66 block
®
104
6
Advertisement
Table of Contents
